Newletter - Review Online

newsletter

Coesia at Achema: a single partner for all pharmaceutical industry needs

Coesia, a group of 21 companies specialized in innovative industrial and packaging solutions, is participating at Achema, an international trade fair dedicated to the process industry with manufacturers and service providers from over 50 countries presenting their...

Be it plastics, building materials or water: sustainable resource management solutions are essential for environmental and climate protection—and could be founded at IFAT Munich.

The World's Leading Trade Fair for Water, Sewage, Waste and Raw Materials Management took place from May 30 to June 3, 2022. 2.984 exhibitors and around 119,000 visitors confirmed the fair as the most important platform for environmental technologies. “A huge...

TorqSense transducers help to guarantee valve actuator performance

Rotork Controls has established a global reputation for robust and reliable valve actuators, operating in some of the world’s most demanding and critical applications. Thorough testing of the motors used in the actuators is one of the keys to this assured performance,...

A second UNISON breeze tube benders is the premier choice for Platinum’s ultimate stairlift

Platinum Stairlifts of Keighley, West Yorkshire, has taken delivery of a second, ultra-precise, all-electric 90 mm (maximum tube diameter) Unison Breeze tube bending machine. The purchase of the machine corresponds with Platinum’s move to a new multi-million-pound...

No Longer a pipe dream: UNISON brings affortable, ultra- precise pipe bending to morse hydraulics

Unison Tube LLC of Danville, VA has assisted Morse Hydraulics, a leading US-based provider of high-pressure hydraulic hoses and fittings, in removing its reliance on external suppliers for the bending of specialist pipe fittings and, in doing so, also reducing the...

New Alfa Laval ThinkTop pulse seat clean for drain valves saves up to 95% in CIP liquid

Drain valves comprise up to 20% of all valves in a typical processing plant. But cleaning them is costly, difficult and time-consuming due to long cleaning cycles and the risk of pressure shocks. The new Alfa Laval ThinkTop pulse seat clean addresses all these issues,...

Precise humidity and temperature sensor for drying processes

The HTP501 humidity and temperature sensor from E+E Elektronik is intended for use in drying chambers and other demanding industrial applications. The stainless steel probe offers high measurement accuracy and a temperature range of -40 to 120 °C. The measured values...

HAVER & BOECKER at Achema

Together with its technology subsidiaries Feige FILLING, AVENTUS and HAVER Automation, HAVER & BOECKER will be presenting the development of its Machinery Division to a Service Division using a hybrid booth at ACHEMA, hall 3.0 booth F38. Visitors can expect models...

GETTING FIT FOR FUTURE PRODUCTION: EXIGO-UK INVESTS IN NUKON FIBRE LASER DISPLAY MACHINE AT MACH 2022

Rochdale-based Exigo-UK is all set for high-performance in-house laser cutting, after purchasing the Nukon 2D fibre laser machine that was displayed on the Ingenium Integration stand at MACH 2022. Makers of the globally acclaimed Exigo range of commercial gym...

Compressor booster performance assured by smart humidity probe

An advanced test cell has been developed to monitor the functionality and performance of a compressor manufacturer’s compression boosters prior to dispatch. Humidity measurement represents a key element of the testing procedure and the company’s engineers have...

HMI solutions for extreme environments

Freezing cold, summer heat or thunderstorms - in extreme weather conditions, many input systems quickly reach their limits. Increased protection against vandalism also plays an important role in the use of robust input systems. In addition, the high demands on hygiene...

Collo’s new online measuring technology

Collo’s new online measuring technology can detect nearly any change in liquid properties straight from the process in real-time. The novel technology has the potential to revolutionize liquid quality control, since it enables continuous process monitoring and is...

Hägglunds hydraulic drives take the spotlight with a bold new look

The advantages of Hägglunds hydraulic drive systems will soon be reflected in a striking redesign, making the Hägglunds brand more visible within Rexroth. While the shift connects the present with a distinguished past, its focus is on the future – and above all on...

BRINGING NUKON’S PRECISION LASER CUTTING TECHNOLOGIES TO MACH 2022

Ingenium Integration Ltd, the sister company of UK-based tube bending machinery specialists Unison Ltd, will be showcasing the Nukon range of precision fibre laser cutting systems at MACH 2022. Visitors to Stand 723, Hall 6, will be able to see a Nukon Eco...

Körber drives the efficiency of cell and gene therapy manufacturing and logistics

The international technology group Körber is driving the integration of supply chain and data orchestration platforms into its market-leading Werum PAS-X Manufacturing Execution System (MES). To this end, the company has entered into strategic partnerships with...

Invisible Switches

The integration of switches in user interfaces usually requires milling or drilling. Certain applications, especially those that are highly sensitive in terms of hygiene or particularly demanding in terms of design, often want to avoid this today. And it is precisely...

Range extension for innovative wireless torque sensor

Sensor Technology has extended its new range of non-contact torque sensors up to 13,000Nm. When the range was launched in late 2020, the largest unit was 500Nm. “We have been very encouraged by the interesting in the new sensors,” says Sales Manager Mark...

Two new Unison breze machines take Stauff’s total fifteen.

STAUFF, the global manufacturer and supplier of precision fluid power products for a wide range of industries, has purchased two new Unison Breeze 35 mm (maximum pipe diameter) left- and right-hand pipe bending machines. One machine has been installed at STAUFF’s...

When EMC is of vital importance

Electromagnetic compatibility (EMC) is not only mandatory in medical technology. If wireless communication between medical applications gets disrupted, it can have serious consequences for the patient. SCHURTER works together with developers in the medical industry to...

Small torque – an essential ingredient for developing the next generation of engineering systems

The growing demand for high speed miniature and micro machines has prompted Sensor Technology Ltd to develop a torque monitor that can accurately measure down to 10mNm (ten milliNewton-metres). This capability is combined with a 50kHz bandwidth so that even the most...

SCHURTER Electronics (China) with new domicile

What do you do when the existing industrial park in which your own factory is located suddenly has to make way for state housing construction? And immediately. A short story from the Shenzhen Special Administrative Region. Aaron Zhang, Managing Director of SCHURTER...

Antimicrobial Switches!

Switches that disinfect themselves. Sound too good to be true? No. It is possible. Antimicrobial coatings inhibit the growth of microorganisms and even kill them. Perfectly suited for medical technology, sanitation areas, and the food service industry. Company The...

Real-world torque measurements enable electric car competition to go virtual

Student engineers are using a newly launched torque sensor for predicting the energy efficiency of a competition-grade electric car. Young technologists from the University of Sheffield alleviated their disappointment at the Covid-cancellation of Shell Eco Challenge...

ACHEMA 2022: Congress and PRAXISforums – Call for Papers

Contributions to the congress program and PRAXISforums of ACHEMA 2022 can be submitted as of now. Scientists from industry and research institutions are invited to submit their papers until 13 September 2021. About 800 presentations at ACHEMA from April 4-8, 2022 in...

STAUFF GROUP SIGNS GLOBAL STRATEGIC PARTNERSHIP WITH UNISON LTD

STAUFF, the global manufacturer and supplier of precision fluid power products for mechanical, industrial and plant engineering, has signed a five-year strategic partnership with UK-based Unison Ltd, the leading name in all-electric tube bending machinery. Unison Ltd...

Development partner with innovative strength

What are the most important criteria for a cooperation partner when developing a new product? The choice of the right supplier can be decisive for the innovative power during the process and the final success of the project. SCHURTER is your development partner...

SCHURTER: solutions for the highest hygiene requirements

"Our knowledge is our strength" From laboratories to meat processing plants, from hospitals to explosion-proof clean rooms: there are applications in which the highest operating safety meets maximum hygienic requirements. SCHURTER supports manufacturers of...

Extended Bunting-Redditch Facility Officially Opened

After twelve months construction work, Bunting’s European Managing Director Simon Ayling officially opened the extended Bunting-Redditch facility. The revamped facility includes additional manufacturing and storage space, a new ‘Customer Experience Centre’, and a...

IT’S A BREEZE: UNISON CONTROL SYSTEM UPGRADE DELIVERS FASTER TUBE MANIPULATION

A software upgrade by Unison Ltd, the UK’s leading manufacturer of all-electric CNC tube and pipe bending machines, is set to bring performance enhancements in the region of 25% to tube manipulation cycle times on the company’s Breeze range of models. Although the...

Membrane switches for demanding applications

SCHURTER has a long tradition in the development and manufacturing of customized membrane switches for demanding applications. Based on our know-how, we find the optimal solution even for challenging applications and fields of use. Our high-quality membrane switches...

NASA’s Perseverance rover commences cutting-edge scientific measurements on Mars with Finnish equipment

NASA's Perseverance rover has now spent its first months on the surface of Mars. The testing and deployment phase is proceeding well, and after the first technology demonstration with the Ingenuity helicopter, the rover is commencing the continuous scientific...

Input systems with antimicrobial surfaces – design for hygienic requirements

Input systems via touch are widely used in industry and medical technology as well as in the public sector to operate various devices. However, touch intensive surfaces cause a health risk. Diseases can be transmitted through contact infections. An input system with...

How often do you think about the silent danger posed by emissions from idling vehicles outside of schools, fast food drive-thru lanes and click and collect points?

South Coast Science is pleased to announce its collaboration with tech start-up Pollution Solution. The company will be installing their vehicle exhaust pollution capture system as part of a fully operational prototype at a private proving ground in Q2 2021 and...

Unison tube bender makes light work of SST’s life-saving Halo system and other titanium structures

Investing in a Unison Breeze all-electric CNC tube bending machine has not only assisted Oxfordshire-based SST Technology in becoming the only British-based precision fabricator authorised to produce the life-saving Halo titanium driver protection system, as used in...

Digital Approvals and Audits – Safety and Efficiency Go Hand in Hand

An on-site inspection is part of the daily business of industrial valve manufacturers and plant operators alike. Safety-relevant components in particular, such as rupture discs or safety valves, must be tested by the manufacturer – this is often done by notified...

Compact manifold for cooling and lubrication of the shaft seal on centrifugal pumps

Centrifugal pumps depend on cooling and lubrication to operate efficiently, reliably and with a long service life. The solutions commonly used for this purpose in the industry are mostly constructions made of a lot of different components. These are often not exactly...

Precision mixing contains costs for product development

A pre-pilot mixing plant is using wireless TorqSense transducers for ultra-accurate viscosity measurement of high-value compounds. The plant is used to prepare small batches of compounds from shampoo and detergent to cosmetics, therapeutic and medical preparations....

Increasing Standardization & Productivity in the Planning and Execution of EPC Projects

The current pandemic combined with the unprecedented fall in oil prices this year, has pressed the world's fast-forward button, especially when it comes to how the EPCs (engineering, procurement & construction companies) will adapt to this new world order....

Hydrogen car drives for efficiency world record

A team of Dutch engineers competing to develop the world’s most efficient hydrogen fuelled car has used a British torque sensor to determine that their next generation vehicle needs a custom designed and built hub motor. To measure the efficiency of the car's...

Drive to Optimise Drug Delivery

Critical drug delivery errors are being driven out of medical practise by advancing intravenous (IV) medication delivery technologies with smart memories and optimised drive mechanisms. ALARIS Medical Systems® develops drug-infusion systems and patient monitoring...

Control without touching

The threat of the coronavirus is forcing us all to take far-reaching measures to reduce health risks as much as is possible. Many of our customers have questions about the hygiene of control panels. Are these applications hygienic enough? SCHURTER offers the...

SCHURTER: Suitable for high power applications

SCHURTER, a leading supplier of fuseholders, is expanding its high-performance fuse clips of the CSO family for 10.3 mm diameter fuses with an M5 version for screw and rivet mounting. Thanks to its excellent material properties, the CSO clip is suitable for...

United against COVID-19

The new coronavirus SARS-CoV-2 keeps the world in suspense. It spreads at an unprecedented speed and exhibits treacherous characteristics. SCHURTER takes this fact into account and has prioritized and ramped up the production of its components and input systems, which...

To utilize the void Vacuum manufacturer Leybold celebrates 170th birthday

Leybold UK Ltd, Chessington, Surrey, April 2020 – Traditionally companies can only be sustainable if they are innovative. The vacuum specialist Leybold succeeded with its combination of tradition and innovation over the course of its history. With this in mind,...

Vaisala unveils high-end industrial Indigo transmitter to enable world-class data and smart decisions

Vaisala's decades of success as the market's most popular humidity transmitter manufacturer continues with the newly launched Indigo 520 Transmitter that combines the latest technology with outstanding new features. Capable of accommodating up to two probes...

REMBE Safety Days Digital Home Edition – Success event continues via video conference

In recent years, the ‘REMBE Safety Days’ series of events has repeatedly made Brilon a meeting place for global explosion safety and process safety. The content of the events was to present and discuss current topics in these areas as well as to create a platform for...

First rewireable IEC appliance inlet with V-Lock

The IEC appliance inlet 4783 from SCHURTER is the first of its kind: for the first time it combines a reconnectable C13 appliance inlet with the proven V-Lock cord retention system. Available in black, white and grey for better differentiation - e.g. in 3-phase...

Three High Sensitivity Metal Detectors for Nappies

An Egyptian paper mill has purchased three meTRON 07 CI Metal Detectors mounted on conveyors to detect metal in the tissue paper used as the filler in the manufacture of baby’s disposable nappies. Bunting is one of the world’s leading designers and manufacturers of...

Werum IT Solutions Launches

Werum IT Solutions launches new smart biometric authentication solution K.ME-IN for pharma and biotech in cooperation with Nymi. Full integration into Werum’s PAS-X Manufacturing Execution System / Out-of-the-box solution with Nymi Band / Secure operator...

Elemica Expands Expertise into Pharmaceutical Sector

Improves Supply Chain Quality and Transparency Elemica, the leading Digital Supply Chain Network in the chemical industry, has now extended its offerings to the pharmaceutical industry. Pharmaceutical Companies using Elemica’s solutions will now benefit from improved...

Elemica Celebrates Its 20th Anniversary as a Supply Chain Network Pioneer

Acquisitions, New Markets, Global Expansion, Next-Gen Solutions Lead to Customer Supply Chain Value Elemica, the leading cloud-based Digital Supply Network for global manufacturing industries, celebrates twenty years of doing business. The company is one of the few...

New Sales Manager Europe for successful centrifugal pump manufacturer

Dipl.-Ing. (FH) Oliver Lempert takes over the sales management activities at Bungartz The continued significant increase in demand for individual pump solutions designed by manufacturer Bungartz requires a reorientation of its sales department. “With Mr Lempert, we...

LumaSense Technologies and LIMAB UK, a Winning Partnership

A British distribution company is pleased to report record sales last year, which can in part be attributed to a very successful partnership, which was forged at the beginning of the year. On the 1st January 2019, Somerset based LIMAB UK was appointed the exclusive...

SENSOR TECHNOLOGY HELPS TO KEEP SHEEP SHORN!

The speed with which sheep shearers can have an animal shorn is a marvel, made possible by ever-developing technology. TorqSense transducers from Sensor Technology are playing an important role in new product development at Gloucestershire-based Lister Shearing, the...

UMF 250 – Rated Current Extension

The proven UMF 250 SMD fuse family is extended by a 15 A version. SCHURTER is now offering the UMF 250 in a total of 15 rated currents between 500 mA and 15 A. It is particularly suitable for electromobility applications with higher rated currents. With its quick...

AEO 10.3×38: Automotive Fuse

With the AEO 10.3x38, SCHURTER launches a high-performance fuse for particularly high voltages up to 1000 VDC and currents up to 50 A, which is particularly suitable for demanding automotive applications. High voltages and high currents occur in electric vehicles in...

TORQSENSE SENSOR GUARANTEES TIP-TOP TAPS!

An innovative TorqSense wireless torque sensor from Sensor Technology provided an effective solution to an interesting engineering challenge when Advanced Design Innovations (ADI), a specialist supplier of custom manufacturing and testing equipment, was asked by...

Hit the target with sonic velocity

LiquiSonic® systems for challenging installation requirements Often operators come to their limits when they are looking for an inline analyzing system that measures highly precise under harsh process conditions. SensoTech is a specialist for those measuring...

New guns available to improve user experience

To better meet customers’ needs, Graco designed 50 New Pro Xp electrostatic spray gun models, components and accessories, and the new ProXpWBx External Charge Waterborne Gun. With more models to choose from, you will get the performance you expect – now with great...

Elemica Named to Top 10 Procurement Solution Provider for 2019 in Europe

The Elemica Network receives award for procurement automation Elemica, the leading cloud-based Digital Supply Network for global manufacturing industries, is named one of the top 10 Procurement Solution Providers in Europe. This was recently announced by CIO...

Rolling Jamming Transmitters

The future undoubtedly belongs to electromobility. However, the automotive industry as the technology driver par excellence still has a few hurdles to overcome. These include electromagnetic compatibility, which has hardly been a topic so far. Company SCHURTER is an...

Poeth introduces explosion-proof Mini Z Conveyor for gently transporting powders, grains and granulates

Compact chain conveyor for 0 to 20 m3 per hour The expense involved in explosion-proofing bucket elevators can sometimes exceed the purchase price of the conveying system itself by up to a factor of three. So Poeth Solids Processing, based in Tegelen in the...

Shawn Opatka appointed as Executive VP and General Manager at Werum IT Solutions America 09/24/2019

Shawn Opatka assumes new role as Executive Vice President and General Manager of Werum IT Solutions America, Inc. On 1 October 2019, Shawn Opatka assumes his new role as Executive Vice President and General Manager of Werum IT Solutions America, Inc. He succeeds...

Shipping operators receive simple answer to meeting SOLAS requirements

The three months grace period on the amended Safety of Life at Sea (SOLAS) Regulations has now expired, and exporters are now required to verify the weight of packed shipping containers. Sensor Technology is able to provide a simple, retrofittable solution for SOLAS...

ACG Capsules introduces ACGcaps™ H+ a new line of Clean Label, Inert and Robust HPMC Capsules

ACG Capsules (ACGC) – part of ACG Group, the only supplier in the world offering end-to-end manufacturing solutions for the pharmaceutical industry – has introduced a new line of HPMC capsules meeting a wide variety of pharmaceutical and nutraceutical needs. The new...

Managing Cell and Gene Therapies

Managing Cell and Gene Therapies: Werum IT Solutions partners with Blood Centers of America Strategic partnership to develop a “vein-to-vein” digital supply chain solution suite integrating manufacturing / Cell and Gene Therapy players benefit from standardization,...

Reducing Engine Friction

An innovative torque sensor is helping to reduce engine emissions and improve economy as part of a project to develop an intelligent lubrication system With engine efficiency under the spotlight like never before, automotive companies are exploring all avenues for...

Novel Sensors and Total Turbine Development

Non contact torque sensors from Sensor Technology are playing a key role in the development of commercial-scale in-stream tidal turbines produced by Irish company, OpenHydro. The company is using these novel sensors, which are based on surface acoustic wave (SAW)...

MES project excellence & implementation support: prime4services and Werum IT Solutions enter service partnership

Customers benefit from independent consulting and experience in the field of MES, Track & Trace and OEE implementation / Scalable and supplementary services to support PAS-X MES implementation / "PAS-X Endorsed Service Partner" for Europe Werum IT Solutions...

Bungartz Successful at the Chemtech Fair in India

Bungartz was able to present its successful pumps twice at the largest fair for chemistry and process industries in India. Within the accompanying congress program Michael Wolf, Regional Director Asia-Pacific, presented the successful special centrifugal pumps to an...

TA35: Thermal circuit breaker

With the TA35 series, SCHURTER offers a particularly versatile generation of miniature circuit breakers with a newly attained UL rating of 277 VAC, the North America rating for 1 of 3 phase used in lighting applications and other mains connected 1-phase devices. They...

From propane to hexane: EDL’s innovative pilot plant opens up new opportunities to process re-finery residues

EDL Anlagenbau Gesellschaft mbH (EDL), the technology provider and engineering company located in Leipzig, Germany, offers an innovative pilot plant in connection with its extraction technology SDA PLUS. At this pilot plant all heavy refinery residues can be tested...

Continuously operating Ploughshare® Type KM 2000 mixer Versatile application

Short retention times, constant reproducibility, the highest degree of homogeneity of the final product and versatile application. These are the features that distinguish the continuous Ploughshare® mixer KM developed by Lödige Process Technology. It is thus the right...

New local Partner for LumaSense covering the UK and Ireland

Dear valued business partner We are pleased to announce that starting 1 January 2019, LIMAB UK has been appointed the distributor for LumaSense Technologies, an Advanced Energy Company, for infrared thermometers and thermal imagers for industrial markets in the UK and...

Management takes over Poeth Solids Processing and builds on company’s success

Poeth's current management team, bringing together Marc Peerlings, Loe Verheijen, Paul Roefs, and Hans Peeters, has taken over 100% of the shares of Poeth B.V., established in Tegelen. On 24 December 2018, the members officially signed the takeover and afterwards made...

Visitors put chemical pump into operation

At Chemtech, Mumbai, India, the pump manufacturer Bungartz presents a functional model of his latest development. Duesseldorf /Germany At India's largest chemical and process industry trade fair in the Bombay Convention & Exhibition Center, the manufacturer...

SPC Consultants certified as new “PAS-X Endorsed Service Partner Local”

Werum IT Solutions and French-based SPC Consultants signed a partnership agreement / Pharma and biotech manufactures benefit from MES support in France, Belgium and Switzerland. Lyon, France, 18 December 2018 – Another promising partnership has been brought on its way...

Measuring torque without slip rings

TorqSense Rotary Torque Sensors, made by Sensor Technology Ltd, are unlike traditional slip ring transducers. They use a simple non-contact radio link for collecting real-time torque signals, letting machine builders and control engineers can do away with expensive...

Transmitter makes any strain gauge wireless

Banbury-based Sensor Technology Ltd has a new range of transmitters that can add wireless capabilities to any make of strain gauge. The WSG series transmitters allow any manufacturer’s strain gauge to send readings to Sensor Technology’s wide range of displays and...

Industrial Process Review – September / October Edition

Just click on the above image and you will be able to view the electronic copy of the journal.

REMBE at the ACHEMA 2018: Now products launched

The NIMU non-invasive signalling unit ensures the highest leak-tightness and reliable monitoring of the rupture discs used. The new GRX graphite rupture disc also ensures permanent leak-tightness in normal operation, due to a specifically developed coating, even at...

AchemAsia 2019 will take place in Shanghai

Moving into its fourth decade, AchemAsia is setting out for new horizons: The International Expo and Innovation Forum for Sustainable Chemical Production will take place from 21-23 May 2019 in Shanghai, China. With an updated event profile, the eleventh edition...

Sharp Packaging: Leading contract packager selects Werum IT Solutions as strategic MES partner

Manufacturing Execution System (MES) as differentiator to digitize operations and improve business opportunities / PAS-X compatibility and a shared customer base key decisive factors / First implementation in Dutch packaging facility Following a global bidding...

AVENTUS ‒ the new specialist for solutions for packing of free-flowing loose goods up to finished pallets

HAVER & BOECKER and WINDMÖLLER & HÖLSCHER introduce their new joint company at Achema Frankfurt. HAVER & BOECKER and WINDMÖLLER & HÖLSCHER present their new joint venture AVENTUS at the Achema trade fair today. AVENTUS is specialized on solutions for...

Pneumofore launches the Atex-certified K Series Gas Compressors

Pneumofore, leading manufacturer of vacuum pumps and compressors since 1923, launches the new K Series gas compressors: the Rotary Vane solution for gas treatment and processing applications. With 2.5 to 10 bar(g) pressure and up to 2690 m3/h, the K Series cover the...

ARO Showcases New Pumps and Fluid Handling Technologies at ACHEMA World Forum 2018

ARO®, a global manufacturer of products for the management of fluids in industrial operations and a brand of Ingersoll Rand®, will showcase a variety of pumping solutions, ranging from air operated diaphragm pumps to piston pumps, and filters, regulators and...

Pumps in motion

Special pump technology to touch Special centrifugal pumps in operation will again be shown by the manufacturer Bungartz at this year's ACHEMA. Visitors can convince themselves of the principle of intrinsically safe pumps and put them into operation themselves at the...

SPX FLOW: Your Partner for Process and Operational Efficiency

The vast portfolio of products and solutions in the SPX® FLOW portfolio are supported by leading application and process expertise. They are designed to offer high value performance in applications across chemical, oil & gas, water & wastewater, power...

Focus on increased system efficiency in Process Technology

Wieland Thermal Solutions at the ACHEMA 2018, hall 6.1, booth C4 . From 11th to 15th June the Achema, the World Forum and Leading Show for the Process Industries, will take place in Frankfurt. At booth C4 in hall 6.1 Wieland Thermal Solutions will be presenting...

How to reduce the cost of ownership of processing plants – reducing downtime and maintenance costs

Introduction Processing plants are built by investors in order to satisfy the identified market needs and create a positive return on investment within a reasonable time. This is a basic economical paradigm applied throughout the global industrial world. Where such...

Engineered Pressure Relief Products

Industrial manufacturing processes are often most efficient operating at elevated temperatures and pressures. The relevant processing equipment and the people operating it need protection in the event of an unplanned discharge. At such pressures and temperatures, if...

HAVER & BOECKER and WINDMÖLLER & HÖLSCHER plan the founding of a joint company

Global market leaders HAVER & BOECKER and WINDMÖLLER & HÖLSCHER plan to bundle their strengths by founding a new joint company in the segment of filling and palletizing. The joint company will specialize in the development and production as well as the sales...

NVENT RAYCHEM PRESENTS INNOVATIVE HEAT TRACING SOLUTIONS THAT CONNECT AND PROTECT AT ACHEMA 2018

nVent, the world’s largest provider of electrical heat tracing solutions, exhibits at this year’s ACHEMA, showcasing its advanced RAYCHEM control and monitoring solutions and heat-tracing systems for the process industries. A new company nVent is a new electrical...

Richter launches new website

Richter Chemie‐Technik GmbH, a global market leader of fluoropolymer lined pump and valve solutions proudly announces the launch of a new website. The new and refreshed website has been optimized to ensure visitors are provided a great user experience ...

Sophisticated in every detail

In the production of lithium batteries extremely high quality demands are placed on the preparation of the required raw materials – even to the limits of technical feasibility. For example, the contamination of cathode masses by foreign ions – in particular iron –...

Advanced outdoor shelters simplify control and instrumentation projects for processing plants

A novel new style of outdoor shelter for process plant applications will be demonstrated by Intertec at ACHEMA. Featuring a cooling system based on a hybrid combination of unpowered passive and active powered technologies, the shelter helps to ensure stable and highly...

Industrial Process Review – March / April 2018

Please click on the link below to view the publication: Industrial Process Review - March / April 2018

International business convention for pharmaceutical, chemical,and petro-chemical industries

PCH Meetings are the opportunity to carry out one-to-one international business meetings in order to strengthen the international dimension of your solutions and meet potential customers from several countries. This event prioritizes quality and a personal approach....

Electric vehicle pioneer favours wireless test rigs

A company that has been at the forefront of electric vehicle design and development for over 20 years has supplied a test rig based on a wireless torque sensor to a world renowned UK University automotive research facility. Based in Fareham, Hants, Tirius has been...

B. Braun’s first PAS-X V3 project successfully implemented

Braun successfully updated their existing PAS-X system from PAS-X V2 to PAS-X V3 in plant A at their headquarters in Melsungen. B. Braun is one of the world's leading healthcare providers offering products and systems for anesthesia, intensive care, cardiology,...

most popular news

Baumüller systems and services

Baumüller presents their complete portfolio for efficient automation, sustainable service, and integrated industry at the Hannover Messe The Nuremberg-based Baumüller Group informs about components, systems, and services connected to automation, system networking, and...

Dinnissen presents Plug & Play concept for all its process technologies

Dinnissen Process Technology develops and produces customized solutions for companies all over the world that enable them to handle and process powders, particles, and granulates quickly and efficiently. Its new and intelligent Plug & Play system is a crucial...

SP Acquires PennTech Machinery Corporation

SP Industries, Inc. (“SP”), a leading designer and manufacturer of state-of-the-art laboratory equipment; a full line of research, pilot and production freeze dryers for biological drug manufacturing solutions; laboratory supplies and glassware, announced today that...

Development partner with innovative strength

Advanced outdoor shelters simplify control and instrumentation projects for processing plants

Unison tube bender makes light work of SST’s life-saving Halo system and other titanium structures

Collo’s new online measuring technology

Focus on increased system efficiency in Process Technology

New Sales Manager Europe for successful centrifugal pump manufacturer

Novasep and GTP Technology join forces

Novasep and GTP Technology join forces to ease production of mAbs and recombinant proteins. The partnership offers biotech firms full CDMO services at all development stages from gene to end product. Novasep, a leading supplier of services and technologies for the...

The gamma/X metering pump sets new standards

The gamma/ X is the first metering pump in its class to be driven by a clever solenoid control. Apart from excellent process reliability and accuracy, it offers so much more within a wide operating range: efficiency throughout its entire service life – from the very...

Most advanced Pegasus® mixer at PowTech

Come see all innovations on this approved mixing concept The well-known Pegasus® mixer still has his double-axle mixing paddles, which rotate in opposite directions. This creates a unique fluidized mixing zone with an excellent homogeneous mixing result, quickly and...

By engineers for engineers

As an international company, Wieland has manufacturing companies, slitting centres and trading companies in many European countries as well as in the USA, in South Africa, Singapore, China and India. The Wieland Group employs some 6,800 people worldwide, 4,400 of them...

WIKA online shop: Measurement technology directly from the manufacturer

At shop.wika.de - customers can purchase a variety of products around the clock directly from the manufacturer. The WIKA online shop offers a comprehensive selection of mechanical and electronic pressure and temperature measuring instruments, supplemented by other...

REMBE’s expanding portfolio

REMBE is continually expanding its portfolio of products and services. The latest addition to its consulting and engineering services is currently REMBE CAE. Until recently any customers who needed strength certificates, tightness analyses or temperature profiles,...

TorqSense transducers help to guarantee valve actuator performance

Hägglunds hydraulic drives take the spotlight with a bold new look

Ametek Land Celebrates 45th Anniversary of UKAS Calibration Lab

AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal...

Compact pumps from SPX that lower the cost of ownership

Diaphragm pumps offer accurate, virtually leak-free performance that makes them ideal for use with hazardous or aggressive fluids. They have also been shown to have lower operational costs compared with equivalent plunger pump installations, resulting in a lower total...

UMF 250 – Rated Current Extension

ACG Capsules introduces ACGcaps™ H+ a new line of Clean Label, Inert and Robust HPMC Capsules

Complete system integration with new IO Manager

New IO Manager product enables complete system integration with AMETEK Land equipment. AMETEK Land has introduced the new Input Output (IO) Manager product, a software solution which enables complete integration of its measurement instrumentation with a factory’s...

Vaisala’s Pressure and Humidity Sensors Are Soon Again on Their Way to Space

NASA is preparing for the next mission to Mars timed for a launch in 2020. Finnish Meteorological Institute (FMI) is among the partners providing measurement equipment for the new Mars 2020 Rover. The pressure and humidity measurement devices are based on Vaisala's...

First Eriez Xtreme® Metal Detector sold in UK

JE Hartley, a frozen food supplier, has purchased the first Xtreme® Metal Detector in the UK for their manufacturing process line. The company processes bagged frozen vegetables at -20ºC and contacted Eriez Europe for the best sensitivity metal detector for their...

The Vaisala MHT410 moisture, hydrogen and temperature transmitter

The Vaisala MHT410 moisture, hydrogen and temperature transmitter provides reliable online monitoring of insulating oil in power transformers. With its unique probe design, the MHT410 delivers accurate measurement and trend data about the health of the transformer in...

Heading for the red planet

Vaisala and Finnish Meteorological Institute Head for Mars with the ExoMars Mission. Vaisala humidity and pressure sensors are again heading for the planet Mars, incorporated in the instrumentation built by the Finnish Meteorological Institute. The program is realized...

Elemica Celebrates Its 20th Anniversary as a Supply Chain Network Pioneer

Innovative medical markers capped to perfection

TorqSense transducers are playing a vital role in packing leading edge medical test kits at Axis-Shield in Dundee, which develops new diagnostic compounds that help with the early identification and management of critical illnesses. Axis-Shield is a world leader in...

Precision-machining of spherical components

Sphero - the compact machining solution The machining of workpieces with spherical forms pushes even the most modern hard turning and standard grinding machines to their technical limits, as great demands are also usually being placed on dimensional accuracy and...

International business convention for pharmaceutical, chemical,and petro-chemical industries

The ideal pump for food and cosmetics applications

Looking for a pump that can self-prime, stall under pressure, pump particles and run dry? Look no further than Graco’s new SaniForce 1040e. Here are the key reasons why. The Graco SaniForce 1040e pump is the first electric double diaphragm transfer pump with all the...

Customized Flow Systems

Reliability and safety are found as the most desired characteristics of devices applied in industrial processes. To meet customers’ need, Tapflo offers tailor-made flow systems of the highest quality. Our mission is to provide technical solutions that guarantee proper...

SPECIM, Spectral Imaging

INS. SPECIM, Spectral Imaging Oy Ltd., a pioneer and global leader in hyperspectral imaging instruments and systems, has received 5,3 M€ of financing to ensure its growth. The financing package consists of venture capital financing by Teknoventure Oy of Oulu, Finland,...

Hit the target with sonic velocity

Transmitter makes any strain gauge wireless

Mobile solutions for pump units and systems- Flexibility and support at every stage of the process

CTH (Hygienic Centrifugal Pump) mounted on a trolley for an OEM customer from the brewery industry. The customer manufactures microbreweries for restaurants and other gastronomic facilities. Customer requested a mobile solution that can be used from the beginning of...

NIMU (Non-Invasive Monitoring Unit)

REMBE’s wide-ranging product line-up of signalling devices for specialists in explosion protection and process safety has now been enhanced even further by the addition of NIMU (Non-Invasive Monitoring Unit). Being non-invasive in its monitoring method for bursting...

Bungartz Successful at the Chemtech Fair in India

WIKA online shop: Measurement technology directly from the manufacturer

At shop.wika.de, customers can purchase a variety of products around the clock directly from the manufacturer. The WIKA online shop offers a comprehensive selection of mechanical and electronic pressure and temperature measuring instruments, supplemented by other...

TORQUE OF A MOTOR REVOLUTION

Oxford YASA Motors, a company created to commercialise the revolutionary YASA motor developed by Oxford University’s Energy and Power Group, is finding that a TorqSense non-contact speed and torque sensor from Sensor Technology is an invaluable aid in the refinement...

Optical rotary torque sensors suitable for low torque and high band width measurements

Sensor Technology has set new benchmark performance standards for optical rotary torque transducers, with the launch of the digital ORT 230/240 series. These new optical rotary torque sensors are ideal for applications when the demand is for low torque and/or high...

Leonhard Kurz presents new IMD Varioform® process

Four methods in one injection cycle Smart and responsible enhancement of 3D component parts IMD Varioform®, a new decorating process from KURZ, shows off its full potential at K 2019. In two partner projects, visitors see with their own eyes how custom decorated 3D...

Eriez Hydroflow to showcase at MACH 2016

Eriez will be showcasing a range of fluid filtration and recycling systems on stand 5989 at MACH 2016 from the 11th to 15th April at the NEC in Birmingham, UK. Eriez Hydroflow is a leader in comprehensive coolant and fluid management solutions for a variety of...

Be it plastics, building materials or water: sustainable resource management solutions are essential for environmental and climate protection—and could be founded at IFAT Munich.

Road Tanker static grounding protection

As the product (liquid or powder) moves through the transfer system and interacts with pumps, valve, filters, meshes and pipe walls, the product will be building up the amount of electrostatic charge it carries. In electrical terms this is commonly described as static...

Recycling of cars made green & cleaner with Verderflex peristaltic pumps

Did you know that 95% of car materials can be used again/ recycled? At the end of its' life, a car yields on average, 140 kilos of shredder waste: 26 kg of metals, 69 kg of plastics, 11 kg of minerals and 24 kg of fibres. In Tiel, Netherlands, a Post Shredder...

Universal Electric Motor Actuator for Lifting Valves

Schubert & Salzer has developed its own lift drive for the sliding gate valves, seat valves and 3-way valves. With its actuating power of 800 N, this extremely compact 2032 electric motor actuator is optimised for excellent actuation precision. With a standard dead...

When EMC is of vital importance

Compressor booster performance assured by smart humidity probe

Elemica Named to Top 10 Procurement Solution Provider for 2019 in Europe

NVENT RAYCHEM PRESENTS INNOVATIVE HEAT TRACING SOLUTIONS THAT CONNECT AND PROTECT AT ACHEMA 2018

nVent, Booth B86, Hall 6.1, ACHEMA, Frankfurt, Germany, 11 – 15 June 2018 nVent, the world’s largest provider of electrical heat tracing solutions, exhibits at this year’s ACHEMA, showcasing its advanced RAYCHEM control and monitoring solutions and heat-tracing...

Continuously operating Ploughshare® Type KM 2000 mixer Versatile application

Rotary joints for the wood and furniture industry

Rotary joints are required for feeding media (water, steam, thermal oil, air, etc.) into rotating shafts, rollers or spindles. They are usually positioned at the end of the rotating machine component and form the interface to the stationary pipelines. The cooling and...

Lifting is going wireless

New wireless control technologies are being adopted by manufacturers and users of cranes and other lifting equipment. Tony Ingham of Sensor Technology Ltd explains the advantages and looks at how the field is developing. Most of us find it odd to look back five or ten...

NovAlix

NovAliX is a CRO focusing on small molecule drug discovery through innovative outsourcing and insourcing research services. NovAliX is specialized in chemistry and structural biology. Its client portfolio includes five of the top 50 global pharma companies. NovAliX...

Real-world torque measurements enable electric car competition to go virtual

Vaisala unveils high-end industrial Indigo transmitter to enable world-class data and smart decisions

Viking Pump Announces New President

Derrick Goddard has been named President of Viking Pump, Inc. in Cedar Falls, Iowa. Derrick has fulfilled the role of Interim President. Derrick has been with Viking Pump / IDEX Corporation for 27 years. His years of product experience include roles with Corporate IT...

Measurements in extremely acidic and polluted gases

Integrating or averaging pitot tubes are eminently suitable for measuring exhaust and flue gases . They are resistant to dirt and condensates. The choice of materials for measuring probes to monitor the combustion of chemical residues is often a difficult one. As soon...

Everything you need to know about explosion safety

Explosion safety covers a broad range of applications. This article gives you brief but comprehensive information about the basics of explosion safety and the available protective systems for this purpose Assessing the explosion hazard Whether it is screens, dryers,...

New bigger Magdrive pumps from Tapflo

The new pumps offer a wide spectrum of application with head going up to 22 mWC and flow reaching 29 m3/h. All Tapflo CTM pumps are available with BSP thread, flange or hose connections. The pumps can be used for chemically corrosive and toxic liquids as well as for...

Sensor data in business processes get demonstrated

SICK demonstrates the uses of sensor data in business processes Integrated solutions based on Industry 4.0 are at the heart of SICK’s presentation at the Hannover Messe Industrie 2016 trade fair, with typical production applications presented in four different...

Sharp Packaging: Leading contract packager selects Werum IT Solutions as strategic MES partner

AUMA part-turn gearbox advancement – enhanced flexibility for sizing

Manufacturing advancements underpin enhanced sizing flexibility for AUMA’s part-turn GS gearboxes. Three duty classes, (1, 2 and 3), have been introduced to support all anticipated operations across predicted valve lifetimes. The new classifications, paired with the...

Pump and valve innovator finds a test rig technology that talks the torque

To analyse the long term performance and reliability of hard working valves and pumps, serial innovators Manchester-based Bifold Group has adopted radio frequency based torque transducers from Sensor Technology Ltd for two of its specialist test rigs. In...

ACHEMA 2022: Congress and PRAXISforums – Call for Papers

Invisible Switches

TA35: Thermal circuit breaker

B. Braun’s first PAS-X V3 project successfully implemented

No Longer a pipe dream: UNISON brings affortable, ultra- precise pipe bending to morse hydraulics

Refrigerant Leak Detection

Refrigerant gas leak detection is becoming a high priority for many companies, especially considering the increasing price of refrigerant gas, not to mention emergency service call-out costs to find, detect and repair leaks of hydrofluorocarbons (HFC),...

Management takes over Poeth Solids Processing and builds on company’s success

How often do you think about the silent danger posed by emissions from idling vehicles outside of schools, fast food drive-thru lanes and click and collect points?

New Temperature Sensor Series for HVAC and Building Technology

E+E Elektronik expands its product range with various sensors for passive temperature measurement for HVAC and building technology. The compact, innovative enclosure with protection class IP65/NEMA 4 facilitates easy and fast installation of the sensors. Due to...

Eaton Expands Its BECO® INTEGRA® PLATE Filtration System Range

Enabling Process Managers to Scale Their Systems Easily Power management company Eaton has launched two new sizes of its BECO INTEGRA PLATE filtration system in response to customer demand. The system is now available in a small 200 mm and larger 1000 mm size, meaning...

Fifty Years of Rotronic

Swiss precision measurement company celebrates 50 years in business. How it all began Graduate engineer Hans Speglitz established Rotronic AG in Zurich in the summer of 1965. Asked to explain the name, he told Vice President Susanne Schroff: “Rotronic is a combination...

Hydrogen car drives for efficiency world record

Control without touching

New Range of Fluid Bed Dryers

The next step in drying technology has been developed by Ventilex. Proved with customers worldwide, in markets ranging from minerals, to chemicals, to foods, the latest generation of fluid bed dryers produces better quality products with exact control of temperature...

Does your cooling towers provide insufficient thermal capacity limiting your production capacity?

Does your cooling towers provide insufficient thermal capacity limiting your production capacity? Considered to maximize capacity? In many occasions existing cooling towers can handle more airflow resulting in superior performance. Bronswerk Heat Transfer B.V....

Water Jet Sweden introduce a multi-purpose waterjet cutting system

Low investment. Long life. High performance. T-model is as rare as an entry level waterjet cutting system based on very high quality standard. Water Jet Sweden has for decades been building quality waterjet cutting machines for the most demanding customers. A...

IT’S A BREEZE: UNISON CONTROL SYSTEM UPGRADE DELIVERS FASTER TUBE MANIPULATION

Membrane switches for demanding applications

CUSTOMIZED FLOW SYSTEMS

Graco launch the new Husky AODD high pressure pump

We are proud to release, as of today, a new addition to the Husky AODD pump product line: the Husky 1050HP. The Husky 1050HP is a 2:1 ratio air-operated triple diaphragm pump (AOTD) for pumping fluid at a maximum pressure of 17,2 bar. The use of a third diaphragm...

New high-pressure pump for waterjet cutting combines high efficiency and small footprint

EuroBLECH 2016 saw KMT Waterjet Systems launch an alternative pump technology as an addition to its portfolio. In the TRILINE TL-I 30 model, the company is offering for the first time a direct-drive pump for waterjet cutting. Calculable cost-of-ownership is a standout...

New cost-effective, high quality, MBR creation from Werum IT Solutions

“Design as a Service” offers the customer-specific creation of MBRs and the efficient operation of Werum’s PAS-X manufacturing execution system. Development of new drugs, process harmonization and standardization or efficient operation of manufacturing execution...

Multiport rotary joint with electrical signal transmission

Rotary joints generally seal the passage of gases or fluids between two counter-rotating bodies. HAAG + ZEISSLER offer the new MRF multiport rotary joint for cases where electrical signals are to be transmitted at the same time, for example for the control of valves...

HAVER & BOECKER and WINDMÖLLER & HÖLSCHER plan the founding of a joint company

SPX FLOW: Your Partner for Process and Operational Efficiency

Shawn Opatka appointed as Executive VP and General Manager at Werum IT Solutions America 09/24/2019

PAS-X Weighing & Dispensing

Kalbe subsidiary PT Dankos Farma introduces Werum’s PAS-X Weighing & Dispensing at Jakarta plant in only six months. Reduced implementation and validation effort through standardization / full integration with Oracle EBS ERP. PT Dankos Farma has successfully taken...

STAUFF GROUP SIGNS GLOBAL STRATEGIC PARTNERSHIP WITH UNISON LTD

Safety is for life

Safety is for life: To protect the lives of customers, so that the employees of industrial companies can safely return to their families after work. That is the mission of the family-owned company REMBE. "Without the right products there is not much that can be...

Raytek, Ircon, and Datapaq join forces to create Fluke Process Instruments

Fluke Corp. is integrating its Raytek, Ircon, and Datapaq product lines into a new brand: Fluke Process Instruments. All three companies have been part of the Fluke Corporation portfolio for some time. “Fluke Process Instruments combines more than 125 years of...

Lödige at Interpack Small, compact, powerful − LC Lab

Lödige promises a special “eye-catcher” at Interpack, where the very smallest of machines at the exhibition stand in Hall 6/B78 is expected to awaken the greatest interest as a complete innovation. With the LC Lab the Paderborn-based machine builder opens up an...

Antimicrobial Switches!

New local Partner for LumaSense covering the UK and Ireland

Fike Announces Solution to Reduce Smoldering Explosions

HERENTALS – Fike Corporation announces the latest addition to its explosion protection lineup – the WarnEx™ Smoldering Detection System. Smoldering is one of the most common ignition sources of fires and dust explosions in industrial processes. Unfortunately it is...

New guns available to improve user experience

Legal Notices

Archives